Shop headings: New Spares | Used Spares | Accessories | Brands
Gearbox bearing- input shaft for input end and output shaft output end
Two bearings required per gearbox
4 in stock
92218424-z 92218424 GU92218424 92 21 84 24
9221 8424 9221.8424 92.21.84.24
£46.00
INC VAT
£38.33 EX VAT
M8 x 75mm A2 stainless steel hex head bolt used as front disc bolt on some small twins and Le Mans 2 and 3. Two of these bolts used as starter motor mounting bolt on big twins fitted with Valeo starter motor
4 in stock
98052475 GU98052475 98 05 24 75
9805 2475 9805.2475 98.05.24.75
£1.40
INC VAT
£1.17 EX VAT
Adjustable Lispa type steering damper
Prevents unwanted or excess steering head movement, adjust to suit your riding style. Also known as Guzzi ref. 03530270
4 in stock
17530260-z 17530260 GU17530260 17 53 02 60
1753 0260 1753.0260 17.53.02.60
Also fits Moto Morini 350 Sport
£58.00
INC VAT
£48.33 EX VAT
Chromed M20 swing arm pivot stub lock nut
See FRA93180 for nut rubber
4 in stock
14547800 GU14547800 14 54 78 00
1454 7800 1454.7800 14.54.78.00
Also fits Benelli 900 Sei
£10.60
INC VAT
£8.83 EX VAT
Pair of EBC FA018HH double-H sintered brake pads for P2 F08 (P8) calipers, best suited for fast road use. These give better braking but will wear brake discs more quickly than standard EBC pads
For P2 F08 calipers. Front and rear pads for all models except P9 equipped Spada where these are only for front calipers.
With the highest friction rating and a lifetime which is the envy of other Brake Pad Manufacturers, the Double-H pads are now available in a new quieter running, faster bedding formulation. NB if opting for sintered pads use them all round
4 in stock
28654601-z 28654601 GU28654601 28 65 46 01
2865 4601 2865.4601 28.65.46.01
Also fits Benelli 354, Benelli Sei, Ducati 250/350/450 Desmo (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ 125/150/250/300 (1985-1992), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)
£24.80
INC VAT
£20.67 EX VAT
Swing arm pivot stub, metric fine thread. See TRA92780 for cover nuts. Replaces Guzzi ref. 14547000
4 in stock
14547001 GU14547001 14 54 70 01
1454 7001 1454.7001 14.54.70.01
£15.50
INC VAT
£12.92 EX VAT
Dellorto mixture screw for PHF36 and PHM40 carbs
Check your mixture screw length as Guzzi used two lengths, this one and the screw in kit FUA93936
4 in stock
30936210 GU30936210 30 93 62 10
3093 6210 3093.6210 30.93.62.10
£10.90
INC VAT
£9.08 EX VAT
Threaded straight cable adjuster with M5 thread
Supplied with nut, used for various carb and choke cables cable splitters
4 in stock
28607678 GU28607678 28 60 76 78
2860 7678 2860.7678 28.60.76.78
£4.20
INC VAT
£3.50 EX VAT
High pressure black fuel line / fuel line, can be used to replace fuel line on other models with 6mm ID fuel lines
This high pressure fuel hose is rated to 225 PSI. It has been designed for use with Modern Chemically Aggressive Bio-Ethanol Enriched Petrol Formulations (E5 & E10) As per currently served petrol pump petrol. Confirms to SAE J30 R7 and BS AU 108. See FUA00004 for hose clips
4 in stock
AP8144069
£8.80
INC VAT
£7.33 EX VAT